Anhui Huayide Intelligent Storage Equipment Co., Ltd.
www.heavyracking.com, Warehouse Racking Made In China.
Add to Cart
Telescopic Cantilever Rack
——
Manual Cranked Type
Manual Telescopic Cantilever Rack · Warehouse Storage Rack · Made In China
Product Introduction
——
No.1 / This product is especially suitable for storing all kinds of longer materials.
No.2 / The product has an independent retractable storage space, which can be used with lifting equipment for convenient access.
No.3 / The single shelf can carry up to 5 tons, and the whole shelf can store dozens of tons of goods.
No.4 / The cantilever is controlled to extend and retract through the corresponding shaft on the transmission box, which is safe and convenient.
No.5 / Cantilever extends and retracts along a straight line to save space.
Specification
| Overall Length | Overall Width | Overall Height | Bay Length | Layers | Loading | Surface |
| L ( mm ) | W ( mm ) | H(mm) | A(mm) | n | T(kg) | Powder Coating |
| 7422 | 3720 | 1100 | 3500 | 4 | 1000 | Blue |
The value "L" in the above specification table shall be based on the site, and the number of cantilever layer n shall be according to the specific loading requirements.
Manual Telescopic Cantilever Rack · Warehouse Storage Rack · Made In China
Product Advantage
——
Thickened steel column:
Adopt thickened steel column. Thickness can reach 40mm. Higher and more stable load capacity.
Telescopic cantilever structure:
90% teLescopic. just puLL out LightLy when Lifting out gentLy turn the cantiLever to Return to the originaL position.
Desiqn and construction principle:
The rack and pinion and the strong steel structure are adopted. in which the main frame is weLded to form the assembly unit.
Enhanced load capacity:
Enhanced Load structure design principLe.moving part supported by bearings. Load capacity up t0 2000-6000kg.
Manual Telescopic Cantilever Rack · Warehouse Storage Rack · Made In China
Structural Principles
——
Telescopic cantilever rack is designed on the basis of a traditional cantilever rack. It retains all ttraditional cantilever advantages, and more wider range of applications. It owes to telescopic arm. The telescopic arm is extended by manual or by electric drive mechanism when picking up the goods.
Compared with ordinary cantilever racking, it has the following differences and advantages:
| Traditional Cantilever Racks | Telescopic Cantilever Racks | |
| Space | Ordinary cantilever racks are used in combination with forklifts, which require a wide forklift channel, which has a large overall area and a corresponding reduction in storage capacity. | The telescopic cantilever rack is used in conjunction with the overhead crane.It does not require a large aisle.The overall shelf occupies a small area, is arranged closely, and has a large storage capacity, which is suitable for small warehouses.The shelf arm itself is retractable, which saves space more.The overall storage capacity is ordinary cantilever. 2-3 times the shelf. |
| Access Efficiency | Ordinary cantilever racking can only take the upper layer and then the lower layer when picking up the goods, and can only put the lower layer first and then the upper layer when stocking, which is very inconvenient. | The telescopic cantilever rack can be accessed arbitrarily, regardless of the sequence and height limit. |
| Equipment Investment | Ordinary cantilever racking are mainly used in combination with forklifts due to their structural limitations.Users need to buy specially equipped forklifts. | while telescopic cantilever racking are equipped with overhead cranes and cranes to support mechanized access. They are commonly used in factories. No need to purchase additional equipment, saving costs. |
Features:
Manual Telescopic Cantilever Rack · Warehouse Storage Rack · Made In China
CASE
—
Manual Telescopic Cantilever Rack · Warehouse Storage Rack · Made In China
Manual Telescopic Cantilever Rack · Warehouse Storage Rack · Made In China
Manual Telescopic Cantilever Rack · Warehouse Storage Rack · Made In China
Manual Telescopic Cantilever Rack · Warehouse Storage Rack · Made In China
Manual Telescopic Cantilever Rack · Warehouse Storage Rack · Made In China
Manual Telescopic Cantilever Rack · Warehouse Storage Rack · Made In China
Manual Telescopic Cantilever Rack · Warehouse Storage Rack · Made In China
Ensure the quality of Huayide racking products
—
| 1 | The raw material of the shelf is customized from China's large steel group of high quality carbon steel, durable and strong, to ensure the quality of the product from the source. |
| 2 | The shelf welding adopts dioxygen protection welding, the welding joint has good cracking resistance, small welding deformation, beautiful forming, and does not need slag cleaning. |
| 3 | Each column and beam of the shelf are designed by professional personnel with professional technology and cut by professional equipment, so as to ensure the accurate size of the shelf. |
| 4 | Professional spray before treatment, oil removal, rust removal, phosphating, powder, and then in high temperature oven baking molding, wear-resistant, rust proof. |
Manual Telescopic Cantilever Rack · Warehouse Storage Rack · Made In China