Anhui Huayide Intelligent Storage Equipment Co., Ltd.
www.heavyracking.com, Warehouse Racking Made In China.
Add to Cart
Push Back Pallet Rack
——
Push back rack, also known as push-in shelve racks, are one of the high-density storage racking systems, suitable for the storage of small and large quantities of goods. According to the principle of "first in, first out", the system places the goods on the inclined rolling track, the carrying trolley runs along the track, and the pallet is placed on the carrying trolley and pushed back to the inside of the rack in turn. The effective depth is 4 pallet positions. After picking up the first pallet, the next pallet slides to the pickup point by itself, effectively using a single channel for access, and it is especially suitable for storage management in the cargo transit area.
Push Back racking is made up of typical structural elements such as pallet trolleys, which have flowable characteristics, and goods are specified to enter and exit at one end of the racking and follow a first-in, first-out sequence.
This type of racking has the typical characteristics of high storage density and fast storage and transport speed.
Suitable for small varieties, large quantities of goods, freezers and other cases that need to improve the space utilisation rate.
— Push Back Pallet Racking ＞www.heavyracking.com＜ Made In China —
Advantages
—
1,When the number of pallets of a certain product is large and "FIFO" is not required, it can simplify the working procedure and the benefit is extremely significant.
2,It can shorten the picking time, and does not need special handling equipment.
3,Because the storage area is more, less channel, so the space utilisation rate and productivity are very high.
4,Can avoid high density storage shelves in the loading and unloading operations are often prone to cargo damage.
5, Suitable for warehouses with a high unit cost per warehouse area, such as cold storage.
6, Can provide 20% -30% pickability.
7, Both safety and operating efficiency are higher than drive-in shelves (through shelves).
8, Compared with ordinary shelves, it can improve the usage rate of about 60% on the ground.
9, Only need to set forward forklift or counterweight forklift can be used, and the forklift operation requirements are lower than drive-in (through type).
— Push Back Pallet Racking ＞www.heavyracking.com＜ Made In China —
Components of push-back racks:
—
The main accessories of Push back racks are composed of posts, beams, rails, and trolleys.
Post: There are two posts connected with cross braces and diagonal braces through special screws. The cross section of the posts is the same as that of pallet racks. In order to meet different loading requirements, the beams can be adjusted up and down the shelf height by 75mm.
Beam: In order to ensure that the beams fall off under the abnormal external force, the anti-falling safety pin connected to the beams and posts is specially designed to ensure the safety of use.
Track: Specially made rectangular track, in order to meet the continuous operation of the carriage and the track, a more wear-resistant galvanized treatment is adopted.
Carriage trolley: Welded according to the size of the pallet. The four wheels with special four corners must meet the requirements for the movement of the cargo.
— Push Back Pallet Racking ＞www.heavyracking.com＜ Made In China —
Specification
—
| Parameter | Specification | Example |
| Rack Dimensions | Length × Width × Height | 3000 mm × 1200 mm × 8000 mm |
| Pallet Size | Length × Width × Height | 1200 mm × 1000 mm × 150 mm |
| Load Capacity | Maximum weight per pallet | 1000 kg per pallet |
| Track Length | Effective length of each shelf track | 8 m |
| Number of Levels | Total number of rack levels | 4 levels |
| Aisle Width | Required aisle width for pallet storage and retrieval | 1000 mm |
| System Compatibility | Supported pallet types and system model | Euro Pallet, ABC Push-Back System |
| Material | Main material (e.g., steel type) | Q235 Steel |
| Surface Treatment | Protective coating or finish type | Powder Coating |
| Provide Design Solutions According To Your Needs And Specifications | ||
— Push Back Pallet Racking ＞www.heavyracking.com＜ Made In China —
If you want Push-back Racking we need this information
—
1. The AutoCAD drawing. 2. The size of your warehouse 3. The height, width, depth of frame.
4. The length, height of beam. 5.How many bays you want? 6. How many layers you want?
7. The loading capacity of each pair beam. 8. How many pallet per layer? 9. The size of each pallet.
10. The loading capacity of each pallet. 11.The RAL color you want. 12. The destination port.Color Powder Coated
Offer Free Push Back Pallet Rack Design
Push Back Rack Components
— Push Back Pallet Racking ＞www.heavyracking.com＜ Made In China —
— Push Back Pallet Racking ＞www.heavyracking.com＜ Made In China —
— Push Back Pallet Racking ＞www.heavyracking.com＜ Made In China —
Ensure the quality of Huayide racking products
—
| 1 | The raw material of the shelf is customized from China's large steel group of high quality carbon steel, durable and strong, to ensure the quality of the product from the source. |
| 2 | The shelf welding adopts dioxygen protection welding, the welding joint has good cracking resistance, small welding deformation, beautiful forming, and does not need slag cleaning. |
| 3 | Each column and beam of the shelf are designed by professional personnel with professional technology and cut by professional equipment, so as to ensure the accurate size of the shelf. |
| 4 | Professional spray before treatment, oil removal, rust removal, phosphating, powder, and then in high temperature oven baking molding, wear-resistant, rust proof. |
— Push Back Pallet Racking ＞www.heavyracking.com＜ Made In China —